 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TEN 5WI Series, 5 Watt RoHS compliant Features Ultra-wide 4: Input Range High Efficiency up to 86% Extended Operating Temperature Range -40 to +85C max. UL 60950-1 Indefinite Short-circuit Protection I/O-Isolation 500VDC Built-inFilter meets EN 55022, Class A and FCC, Level A without external Components Remote On/Off Industry Standard Pinout Six-Side shielded Case Lead free Design, fully RoHS compliant 3 Year Product Warranty The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of -40C to +85C. Models Ordercode TEN 5-240WI TEN 5-24WI TEN 5-242WI TEN 5-2422WI TEN 5-2423WI TEN 5-480WI TEN 5-48WI TEN 5-482WI TEN 5-4822WI TEN 5-4823WI 8 - 75 VDC (48 VDC nominal) 9 - 36 VDC (24 VDC nominal) Input voltage range Output voltage 3,3 VDC 5,1 VDC 12 VDC 12 VDC 15 VDC 3,3 VDC 5,1 VDC 12 VDC 12 VDC 15 VDC Output current max. 3'000 mA 2`950 mA 1'250 mA 625 mA 500 mA 3'000 mA 2`950 mA 1'250 mA 625 mA 500 mA Efficiency typ. 78 % 82 % 85 % 85 % 86 % 78 % 82 % 85 % 85 % 86 % http://www.tracopower.com Page of 3 DC/DC Converters TEN 5WI Input Specifications Input current at no load Input current at full load 24 Vin; 24 Vin; 48 Vin; 48 Vin; 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. 3.3 Vout other output 3.3 Vout other output models: models: models: models: 528 mA typ. 740 mA typ. 264 mA typ. 370 mA typ. 5 Watt Surge voltage (100 msec. max.) Conducted noise (input) 24 Vin models: 50 V max. 48 Vin models: 100 V max. EN 55022 level A, FCC part 15, level A 1% - Input variation Vin min. to Vin max. - Load variation 10 - 100 % 0.5 % max. 1 % max. 80 mVpk-pk max. 0.02 % / K > 110% of Iout max., foldback indefinite (automatic recovery) single output models: 470 F max. dual output models: 220 F max. - Operating - Case temperature - Storage - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C 3.5%/K above 70C 95 % rel H max. > 700'000 h @ + 25 C 1`500 VDC 1200 pF typ > 1'000 MOhm 330 kHz typ. (pulse width modulation) - On: - Off: - Off idle current: 2.5 ... 5.5 VDC or open circuit. -0.7 ... 0.8 VDC or short circuit pin 2 and pin 6 10 mA max. UL 60950-1, EN 60950-1, IEC 60950-1 CSA File No. 226037 http://directories.csa-international.org - Input/Output - Input/Output - Input/Output (500 VDC) Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217E ground benign) Isolation voltage (60 sec) Isolation capacity Isolation resistance Switching frequency (fixed) Remote On/Off: Safety standards Safety approvals All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 5WI Physical Specifications Case material Baseplate material Potting material Weight Soldering temperature copper, nickel plated non conductive FR4 Silicon TSE-3331A/B (flammability to UL 94V-0) 32g (1.09oz) max. 265 C / 10 sec. 5 Watt Outline Dimensions 50.8 (2.0) (0.20) 5.08 7.62 10.16 10.16 (0.30) 7.62 (0.30) 6 20.32 (0.80) 5 15.2 (0.60) (0.40) 1 2 4 (1.00) 25.4 Bottom View (0.40) 3 (0.10) Pin-Out Pin 2 (0.40) 2.5 Single +Vin (Vcc) -Vin (GND) +Vout No pin -Vout Dual +Vin (Vcc) -Vin (GND) +Vout Common -Vout 10.2 (0.24) 3 4 5 6 6.0 Insulated baseplate Remote On/Off Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitsch tolerances: 0.25 (0.01) Case tolerances: 0.5 (0.02) Specifications can be changed any time without notice Rev. 09/06 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3 |
Price & Availability of TEN15-2410WI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |